How to Apply!
To apply DTF hot peel heat transfers, pre-press your garment for 3–5 seconds at 300–325°F to remove moisture, then place the transfer ink-side down and press with medium to firm pressure for 10–12 seconds. Open the press and peel the film immediately while it’s still hot in one smooth motion. If any areas lift, lay the film back down and press for a few more seconds. After removing the film, cover the design with parchment or Teflon and press again for 5–7 seconds to lock everything in. Wait 24 hours before washing, wash inside out on cold, avoid softeners, and tumble dry low or hang dry.
